Other
See other Other Articles
Title: Another New Toy - 69 Camaro
Source:
[None]
URL Source: [None]
Published: Feb 29, 2012
Author: Me
Post Date: 2012-02-29 20:08:40 by We The People
Keywords: None
Views: 56437
Comments: 91
Somebody STOP ME! 1969 Camaro - not sure if it's a base coupe, RS, SS, Sport Coupe, etc. I'm hoping someone here will know something about it. It had, and comes with the original, numbers matching 307, but it currently has a monster 350 in it. It's been years since I drove a car as fast as this one. All emblems are gone. I do know it's an X11 car, but that's just a trim package. Wont know about the protecto plate till I get it home and look for it. Whatever it is, it WILL BE an SS, even if just a clone. I'll post pics when I get it home.
Post Comment Private Reply Ignore Thread
Top • Page Up • Full Thread • Page Down • Bottom/Latest
Begin Trace Mode for Comment # 58.
#10. To: We The People (#0)
I not a camaro man but that's the nicest one they made. It looks better then most of the camaros I usually see in the rear view mirror of my mustang.
LOL! What?!? That 6 cylinder hatchback?!?
6's are for girls. I've got a fox body mustang with about 25K in mods. All my engine work was done by JBA racing in San Diego and that car is scary ass fast. Love to take it to the shop and watch the mechanics face when they pop the hood. It's got one bad ass engine and sounds so sweet, I could just sat and listen to it purr for hours.
Love to take it to the shop and watch the mechanics face when they pop the hood. It's got one bad ass engine and sounds so sweet, I could just sat and listen to it purr for hours. Very nice! Post some pics if you will. I'll get some photos of the motor today. Maybe even some video so you can hear it. The interior on this car is trashed. Some of the window, door, rear fender and wheel well trim is missing. I've got some of it to put back on but not all. I'm thinking blood red for this car. Or... should I go back original rallye green? What do you think?
You gotta go with the blood red. I painted my stang candy apple red and it's so sweet no color fits a bad ass ride better then red. I saw your comments about making the car an SS clone and I'd thought about making my fox a Fobra but decided in the end to make the car as plain as possible. Took off all the badges etc so it just looks like an average stang of the error. Thought i'd end up surprising some moronic tuner but then engine so sweet no ones ever tried to race me. Oh well, I'm way too old for that crap anyway. I envy you man, I was looking at your picture and wishing I could get my hands on that baby. It's going to be sweet.
Well, I wouldn't recommend envying me right now. Aside from the metal that needs cut out and welded back in at the rear shock mounts, I need to do the 4 wheel disc brake conversion, electronic ignition, install some new suspension parts - front coils, rear leafs, ball joints, etc., a mechanical fuel pump, a new fuel tank & lines, (there is currently a fuel cell and electric fuel pump in the trunk) a new shifter, complete new interior, new doors, new paint, blast the undercarriage and paint, new glass, tires and wheels, a sound system and a new console with gauges. And I'm sure there will be more that I haven't found yet. The engine was smoking a little. I hate the 'just getting started' part of a project. I'm a bit overwhelmed right now, especially when I start totaling all this up. I haven't done a project like this since the 80's.
After viewing the pics I'm thinking we all should just schedule a desert party out here in Joshua Tree and dose that baby up with 3inch magnum rifled slugs. .....just kidding. I will say it's a bit uphill appearing with all that rust....and if the structural integrity looks like that in other areas you may consider switching from the LS-6 plan and dropping in a government motors chevy volt powertrain so she don't fold up in half when you gas her too much. And better you than me be tackling the task and looking forward to an occassional pic posting showing the progress.
Well, I have a brother in law in the used car business, so good news is I can get all the mechanicals and body work and paint done dirt cheap. The guy is a real wheeler dealer, so I get bargains like a brand new stroker motor for my truck for $900, installation for $350. He has so much of this type of work done that they give him dirt cheap pricing. He's doing the same with a 70 Chevelle right now. It's much better than trying to get it done with the weekend time I have to donate, so I'll just pay to have it done. I will post some progress photos though, and be proud like I did more than hand over cash! LOL! The worst of the rust is shown in the pics I posted, so I guess it's not that bad. I also need a couple rear wheel wells and both doors. I'll do the brake conversion and suspension parts, new fuel tank and new shifter. Probably the interior too, with a kit. What HEI would you guys recommend?
MSD 6A Module with either the MSD or Mallory HEI distributor. BTW I'm using a Demon 750 on an Edelbrock Torker II on my LT-1 -- good small block setup (but I also run a bit of "gas" fogged in below that Demon :):)....)
Thank you, sirs! It's been a few years since I've done this, so I appreciate all your advice. I was talking to the guy I bought this car from today. He was telling me him and his father built the engine using a recipe straight out of Hot Rod magazine. He thinks he still has the issue put away in a closet. He's going to see if he can find it and send it to me. He said the engine dyno'd at just under 425 horse. Sweet! Keith Black pistons, roller rockers, I can't remember all he told me, but I do remember it gave me about half a chubby! He said his father, a machinist, weighed and balanced each piston and rod. I'm not sure if I believe him or not, but he told me he's personally had that car at 159 mph. He also said the rear end is 2.73 gears. Does that sound right?
Sounds like the 412 SBC I have in a (now) junk van that I am going to use to replace the worn-out 305 in my 48 Plymouth. I even used gapless rings and a Pete Jackson gear drive with a dual feed 750 Holley on a Weiand high rise intake. I used 350 rods after having them shot peened and straighted to make it a "long stroke 412". Had the rotating assembly balanced by a speed shop that builds engines for NASCAR pros. Even bought and used a degree wheel and custom bushings to get the timing right where I wanted it. I was putting this engine together to put into one of my hot rods,and then the small block in my 1 ton 76 Chevy van went bad,so I put the rebuilt engine I had on hand in the van. Had the fastest junk 1 ton van in the state. Went for a test drive the day we got it back together and running,and had the original small block and turbo 350 in the back of the van,10 100 lb bags of sand for my sandblaster,and a 10 drawer tool box full of tools. When it came out of passing gear at 65 MPH it actually snapped my neck (shift kit in the trans),and it was passing 100 mph before I could get my foot out of it. 100 MPH might not be fast in a car,but it's a hell of a lot faster than I want to go in a 1 ton van. Yeah,I think this engine will really wake up that little coupe. Especially if I put the Z-28 cross ram 2x4 intake on it that I have.
There are no replies to Comment # 58. End Trace Mode for Comment # 58.
Top • Page Up • Full Thread • Page Down • Bottom/Latest
#21. To: calcon (#10)
I not a camaro man but that's the nicest one they made. It looks better then most of the camaros I usually see in the rear view mirror of my mustang.
#23. To: We The People (#21)
LOL! What?!? That 6 cylinder hatchback?!?
#26. To: calcon (#23)
6's are for girls. I've got a fox body mustang with about 25K in mods. All my engine work was done by JBA racing in San Diego and that car is scary ass fast.
#31. To: We The People (#26)
I'm thinking blood red for this car. Or... should I go back original rallye green? What do you think?
#41. To: calcon (#31)
I envy you man, I was looking at your picture and wishing I could get my hands on that baby.
#52. To: We The People (#41)
#54. To: e_type_jag, sneakypete, Capitalist Eric (#52)
I will say it's a bit uphill appearing with all that rust
#56. To: We The People (#54)
What HEI would you guys recommend?
#57. To: e_type_jag, sneakypete (#56)
#58. To: We The People (#57)
Keith Black pistons, roller rockers, I can't remember all he told me, but I do remember it gave me about half a chubby! He said his father, a machinist, weighed and balanced each piston and rod.
Replies to Comment # 58.
[Home] [Headlines] [Latest Articles] [Latest Comments] [Post] [Mail] [Sign-in] [Setup] [Help] [Register]