Science-Technology
See other Science-Technology Articles
Title: Does a Magnet Gun Conserve Momentum?
Source:
wired
URL Source: http://www.wired.com/wiredscience/2 ... -magnet-gun-conserve-momentum/
Published: Dec 27, 2011
Author: Rhett Allain
Post Date: 2011-12-27 23:14:49 by A K A Stone
Keywords: None
Views: 1607
Comments: 2
The Gauss gun. A very simple, yet very cool device. Check out this video. The Gauss gun. A very simple, yet very cool device. Check out this video. There are many other examples of this Gauss gun. You can easily reproduce this yourself. You just need some magnets and steel balls (or balls of steel). In terms of work-energy, I can think of the balls and the magnets as closed system. This means there is no work done and the energy equation can be written as: Since the final ball speed is greater than the initial, the change in kinetic energy is a positive value. This means that the change in magnetic potential would have to be negative. Just what the heck is magnetic potential energy? Well, think of it this way. One ball on one side of the magnet plus 3 on the other takes less work to create than 4 on one side and none on the other. That is about the best I can say without getting too complicated. Momentum Although the kinetic energy is not conserved, the momentum should be conserved. Why? It has to do with forces and time. Here is a diagram of the same balls before the collision. Since forces are an interaction between objects, the force on the initially moving ball must be the same magnitude as the force the moving ball exerts on the rest of the stuff. Further, the time these forces act on each other have to also be the same. Looking at the momentum principle, it says (for the moving ball): Same force (magnitude) and same time means the other stuff will have the same change in momentum (magnitude). This is conservation of momentum. It is a consequence of forces interacting in a closed system. Momentum Reality Check Come with me. We will go to the lab and see if momentum is really conserved. Of course, there is one small thing. There is a frictional force on the rolling balls that is small. Less small is the frictional force on the magnets. But we can try anyway. Here I reproduced the Gauss gun, but at a better viewing angle. Does a Magnet Gun Conserve Momentum? By Rhett Allain Email Author December 26, 2011 | 8:25 am | Categories: Dot Physics, Science Blogs The Gauss gun. A very simple, yet very cool device. Check out this video. There are many other examples of this Gauss gun. You can easily reproduce this yourself. You just need some magnets and steel balls (or balls of steel). Energy This seems to be someway to cheat, doesn’t it? If you replaced the magnets and the magnetic interactions with springs, would the same thing happen? No. Then what is going on here? Why does the final ball leave faster than the initially moving ball? In terms of energy, clearly kinetic energy is not conserved. However, the total energy should be conserved. Drawings.key In terms of work-energy, I can think of the balls and the magnets as closed system. This means there is no work done and the energy equation can be written as: La te xi t 1 4 Since the final ball speed is greater than the initial, the change in kinetic energy is a positive value. This means that the change in magnetic potential would have to be negative. Just what the heck is magnetic potential energy? Well, think of it this way. One ball on one side of the magnet plus 3 on the other takes less work to create than 4 on one side and none on the other. That is about the best I can say without getting too complicated. Momentum Although the kinetic energy is not conserved, the momentum should be conserved. Why? It has to do with forces and time. Here is a diagram of the same balls before the collision. Drawings.key 1 Since forces are an interaction between objects, the force on the initially moving ball must be the same magnitude as the force the moving ball exerts on the rest of the stuff. Further, the time these forces act on each other have to also be the same. Looking at the momentum principle, it says (for the moving ball): La te xi t 1 5 Same force (magnitude) and same time means the other stuff will have the same change in momentum (magnitude). This is conservation of momentum. It is a consequence of forces interacting in a closed system. Momentum Reality Check Come with me. We will go to the lab and see if momentum is really conserved. Of course, there is one small thing. There is a frictional force on the rolling balls that is small. Less small is the frictional force on the magnets. But we can try anyway. Here I reproduced the Gauss gun, but at a better viewing angle. Using Tracker video analysis, I get this plot of the position of the first moving ball. Notice that I gave it a little push so that it started with a horizontal velocity of about 0.034 m/s. But before it collided, it slowed down before it sped up. It had a minimum horizontal speed of 0.025 m/s and right before it collided, it had a speed of about 0.29 m/s. I suspect the ball slowed down a bit because of the frictional force. For momentum purposes, I will assume the speed of the ball before it started interacting was 0.025 m/s. And if the ball had a mass of 67 grams, this would make the total initial x-momentum – 0.00168 kg*m/s. What about after the interaction? Here I have two objects moving: the launched ball and the other balls and magnets and stuff. Here is the motion of the launched ball. Launched It has a x-velocity of -1.895 m/s to give it an x-momentum of -.127 kg*m/s. The motion of the magnet is a little trickier. Why? Because there is some clear friction there. Here is the motion of the recoil stuff. It looks like it has a constant acceleration – which makes sense. If there is a constant frictional force, there would be a constant acceleration. However, I don’t really care about the friction. I care about “initial” x-velocity. Here, “initial” means the x-velocity RIGHT after the collision. So, the quadratic fit to that data gives me the position as a function of time. The x-velocity as a function of time is the derivative (with respect to time) of the position function. This means I have the following for position and velocity. WARNING. The a above is NOT the acceleration. It is the fit parameter, that is all. I used the same letters as from Tracker. Tracker gives these parameters (a,b,c) from the fit. To find the initial velocity, I just need to know a, b and the time. Looking at the graph, it looks like the collision happened around time t = 2.052 seconds. Using this time, I get an x-velocity of 0.39 m/s. The objects moving are 3 balls and one magnet. The magnet has a mass of 73.3 grams. This gives the recoiling objects a momentum of 0.107 kg*m/s. So, how does the initial x-momentum compare to the final x-momentum? Before the interaction, the momentum was -0.0017 kg*m/s. The total final momentum was (-.127 + 0.107) kg*m/s = -0.02 kg*m/s. Yes, this isn’t quite the same as the initial momentum. But really, it isn’t too far off. I am mostly pleased. Bonus Points: See if you can figure out the coefficient of kinetic friction between the magnet-balls and the track.
Poster Comment: Comment from source site Trout007 There is an easy explanation Look at where the magnets are. The magnetic force on a ball is a function of it's distance from the magnets. I think it falls off by 1/d^3. The first ball actually hits the magnet where the force is the strongest. The ball that leaves starts 3 balls away from the magnets where the magnetic force is much less. But the momentum transfer doesn't depend much on how many balls are in the way. So the velocity of the first ball right when it hits is pretty close to the velocity of the last ball when it leaves. BUT the ball that leaves doesn't have to overcome much magnetic force so it maintains that velocity. To show it's true start with 2 balls on the right and 3 balls on the left. Roll a ball towards the side with 2 balls and the ball that comes off will have the same speed as the one that hits. I've build many of these and it's fun to play with the configuration. You can put them in series where you make a few groups like this B= ball M= magnet BBMB BBMB BBMB BBMB B You have to adjust the spacing so they don't attract each other. Also I never let the ball directly hit a magnet because eventually you crack them. An ideal configuration would have the magnet embedded into a bar of hard steel so the magnet itself doesn't take any impact at all.
Post Comment Private Reply Ignore Thread
Top • Page Up • Full Thread • Page Down • Bottom/Latest
#1. To: All (#0)
www.youtube.com/watch?v=EBPPc_JAm6g&feature=related
#2. To: All (#0)
Top • Page Up • Full Thread • Page Down • Bottom/Latest
[Home] [Headlines] [Latest Articles] [Latest Comments] [Post] [Mail] [Sign-in] [Setup] [Help] [Register]