International News
See other International News Articles
Title: BP Oil Spill: Failed Safety Device On Deepwater Horizon Rig Was Modified In China Rather Than Overhauled In The USA
Source:
GUARDIAN UK
URL Source: http://www.guardian.co.uk/environme ... rizon-blow-out-preventer-china
Published: Jul 19, 2010
Author: Tim Webb
Post Date: 2010-07-19 20:09:39 by Brian S
Keywords: None
Views: 12471
Comments: 24
BP ordered the owner of the Deepwater Horizon rig, whose explosion led to the worst environmental disaster in US history, to overhaul a crucial piece of the rig's safety equipment in China, the Observer has learnt. The blow-out preventer – the last line of defence against an out-of-control well – subsequently failed to activate and is at the centre of investigations into what caused the disaster. Experts say that the practice of having such engineering work carried out in China, rather than the US, saves money and is common in the industry. This weekend BP remained cautiously optimistic that the cap placed on top of the Gulf of Mexico well on Thursday night would continue to hold back the torrent of oil. It is the first time the flow has been stopped since the accident happened almost three months ago. But BP said that the pressure readings from the Macondo well were not as high as it had hoped, which could indicate that it has ruptured and that oil could be leaking out somewhere else. There is no evidence that the significant modifications to the blowout preventer (BOP), which were carried out in China in 2005, caused the equipment to fail. But industry lawyers said BP could be made liable for any mistakes that a Chinese subcontractor made carrying out the work. It would be almost impossible to secure damages in China, where international law is barely recognised. It is understood that lawyers for Cameron International, the manufacturer of the BOP, will argue the device was so significantly modified in China that it no longer resembled the original component, and that Cameron should therefore not be held liable. Transocean, the owner of the Deepwater Horizon, which bought the BOP from Cameron, has already told congressional hearings into the disaster that the modifications were carried out at BP's request and "under its direction" as the lessee of the rig. BP and Cameron declined to comment this weekend. Responding to the latest developments in the Gulf, President Obama said that it was too early to say if the well had been permanently fixed. "We're moving in that direction, but I don't want us to get too far ahead of ourselves," he said. BP has been monitoring the pressure inside the well since Thursday. Thad Allen, the retired Coast Guard admiral overseeing the response effort, said that pressure of about 7,500 pounds per square inch would show the well was intact, while pressure that lingered below 6,000 psi would indicate it had been damaged and could be leaking. The pressure on Friday night remained at about 6,700 psi and was rising only fractionally. Allen has told BP to step up monitoring for any seabed breaches and gather additional seismological data to detect any pockets of oil in the layers of rock and sediment around the well. This week David Cameron will travel to the US to meet Obama and other politicians where he will stress the importance of BP to the UK economy. Business figures such as Lord Jones, the UK trade ambassador and former CBI boss, criticised Cameron for not being sufficiently supportive of the company last month after he said that he "understood the US government's frustrations" over BP's failed attempts to stop the leak. A government adviser said that Cameron and Obama shared common interests over the crisis, and that both wanted BP to survive the incident. BP accounts for over a tenth of all share dividends paid by UK companies, and pension funds rely on the income it generates. Politicians in the US want BP to make enough profits to pay potentially billions of dollars in compensation and damages arising from the spill.
Post Comment Private Reply Ignore Thread
Top • Page Up • Full Thread • Page Down • Bottom/Latest
#1. To: Brian S (#0)
Oh Shit. Hold on. Ever heard of a 'bullhead'. Also called a Static Kill. To push mud into the Well Head. Depends on a Integral Structure to hold the pressure as the oil/gas is pushed down the well. bp's doing anything to keep from doing a flow rate. Even killing the planet. I'm listening to Kent Wells Monday afternoon McBriefing. After all of the normal generalities, he has just dropped the bomb that they're considering the "static kill". He said that it's not approved and they studying it, and then did not elaborate. So far, the press hasn't picked up on it and are mostly focused on the Hatfields and McCoys style feud that kicked up yesterday after the Suttles briefing. http://dailyhurricane.com/2010/07/bp-top-kill-redux-now-called-the-static-kill.html
When is the evacuation going to commence, mcclown? Sneakypete, have you ever been married? Said things you later regretted?
bp will do anything to keep from measuring the flow rate. Default Re: Deepwater Horizon - Transocean Oil Rig Fire Quote Originally Posted by ex-pe-uk View Post It sounds like the mini-BOP may hold and the talk is of containment and shut-in until the relief well intersects. But why not start a top kill straightaway by the choke and kill lines and get this thing over with? Wouldn't the shut-in wellhead pressure start to drop straightaway? Just a thought from a non-driller. From the Oilfield Glossary: bullhead 1. vb. [Drilling]ID: 1257 To forcibly pump fluids into a formation, usually formation fluids that have entered the wellbore during a well control event. Though bullheading is intrinsically risky, it is performed if the formation fluids are suspected to contain hydrogen sulfide gas to prevent the toxic gas from reaching the surface. Bullheading is also performed if normal circulation cannot occur, such as after a borehole collapse. The primary risk in bullheading is that the drilling crew has no control over where the fluid goes and the fluid being pumped downhole usually enters the weakest formation. In addition, if only shallow casing is cemented in the well, the bullheading operation can cause wellbore fluids to broach around the casing shoe and reach the surface. This broaching to the surface has the effect of fluidizing and destabilizing the soil (or the subsea floor), and can lead to the formation of a crater and loss of equipment and life. http://gcaptain.com/forum/offshore/4805 ... e-191.html
Why not commence the evacuation, mcclown? Sneakypete, have you ever been married? Said things you later regretted?
NYTIMES is now running with this development... Thanks for the 'heads-up'. Never swear "allegiance" to anything other than the 'right to change your mind'!
Sheeeeeeeeeeeeeeei McToejam when did you become such an "expert" on the oil patch, and deep water drilling rigs? All of those years that you were meeting with the other Fabianists and community organizing? Maybe it was all of those years you were busy hugging and spiking trees McToejam? Maybe it was while you "occupied" those trees at Berserkley McToejam? possibly it was while you sucked at the gooberment teat in some meaningless paper pushing gig? Whenever did you manage to work in getting your petroleum engineering degree or journey man rig tender card? Hmmmmmmm McToejam? How's that end of the world scenario working out for you libTURD boy? How's your depends supply holding out? You F ing brain dead libTURD whore.
Quoted by PDS insane assholes every where.
Fuck you knob gobbler. Suck my bozo...
Have they stated that the evacuation of millions has commenced, or is that just so much mcclown vomit? Sneakypete, have you ever been married? Said things you later regretted?
War is queer! Sneakypete, have you ever been married? Said things you later regretted?
;} Libertys Flame is such a refreshing site. Glad to be here. 8D James
;} There is video. As I watched this, I was nonplussed, at first, because the ROV was stationary at 11-feet above the seabed, and began to move. The first part is clearly prop-wash. It becomes distinctly different starting at ~4:30: Location Of Leak... (getting worse. Leaks don't fix themselves. And this cap was neverr designed for anything but temporary/hurricanes. The leak is in the vicinity of the Q400 connector, about 700-800 feet away from the BOP. http://monkeyfister.blogspot.com/
When is the evacuation going to commence, mcclown? Sneakypete, have you ever been married? Said things you later regretted?
Also called a Static Kill. Thanks for the heads up James. I'm not sure I understand exactly what it is. I'll continue to read and learn.
Suck the big one, puppy dog.
Is that all you queers dream and fantasize about? Geezus you perverts are disgusting! Sneakypete, have you ever been married? Said things you later regretted?
Okay, yucktard, suck the little one...you know, puppy love...
You queers aren't fussy, are you jerx? Sneakypete, have you ever been married? Said things you later regretted?
LOL! It's all queer, all of the time, with you pole smokers isn't it pa-boy?
Quoted by PDS insane assholes every where.
LOL! I told you before vile beyond mere words TRASH, you really should quit looking in the mirror when you post.
Quoted by PDS insane assholes every where.
Yes it is. Even more so with a strategic use of the bozo...
Yes it is. Even more so with a strategic use of the bozo... 8D
Thanks for the heads up James. I'm not sure I understand exactly what it is. I'll continue to read and learn. Forcing mud in thru the top. Essentially weighing the oil/gas down the well bore. Problem is that the psi increaes exponentially at the bottom. Kinda like putting toothpaste back into the tube. The paste will go everywhere but 'in' with every available opportunity.
I saw a Bill Nye the Science Guy explanation where he warned that there might be the possibility of the entire well popping up from the seabed from all the pressure (with the temporary cap in place) - he used a drinking straw to illustrate.
They, bp, started with inferior well bore. Short cutted thru out. And Bill could be right. Bigger possibility is the leak is blown out beneath. A blow out with in a blow out. Then we nuke. And bp caught photo shopping. Again. I remembered the photo weeks ago. Passed it by. John from Americablog can't figure out why they photoshopped. IT was to replace the screen behind to cover up either seeps or location of bop. http://www.americablog.com/2010/07/bp-fakes-another-oil-spill-photo-this.html It's starting to look like Capricorn One over at BP. In addition to a photo of the oil spill crisis command center that BP faked on their Web site, an astute reader found yet another photo of the crisis response that has been faked by BP. This one is of the "top kill" effort to stop the spill a month or so ago. Above and below are parts of the photo that show that BP, yet again, inserted a fake screen behind its employees to make them look busier, or something.
#2. To: mcgowanjm (#1)
bp's doing anything to keep from doing a flow rate. Even killing the planet.
#3. To: Fred Mertz, All (#1)
#4. To: mcgowanjm (#3)
why not start a top kill straightaway
#5. To: mcgowanjm (#1)
#6. To: mcgowanjm (#1)
#7. To: Mad Dog (#6)
#8. To: Brian S, mcgowanjm (#5)
NYTIMES is now running with this development...
#9. To: war, Mad Dog (#7)
Suck my bozo...
#10. To: war (#7)
#11. To: Brian S (#5)
Thanks for the 'heads-up'.
#12. To: mcgowanjm (#11)
The leak is in the vicinity of the Q400 connector,
#13. To: mcgowanjm (#1)
Oh Shit. Hold on. Ever heard of a 'bullhead'.
#14. To: Mad Dog (#6)
#15. To: Fred Mertz (#14)
Suck the big one
#16. To: Ibluafartsky (#15)
#17. To: Fred Mertz (#16)
suck the little one...
#18. To: Fred Mertz (#14)
#19. To: war (#7)
#20. To: mcgowanjm (#10)
(Edited)
#21. To: war (#20)
jm
#22. To: Fred Mertz (#13)
#23. To: mcgowanjm (#22)
#24. To: Fred Mertz, All (#23)
Top • Page Up • Full Thread • Page Down • Bottom/Latest
[Home] [Headlines] [Latest Articles] [Latest Comments] [Post] [Mail] [Sign-in] [Setup] [Help] [Register]